• Send Enquiry
  • Login
  • Sign Up

Our Products

Heat And Refrigeration System

Hot air oven

Hot air oven Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in shoved enamel off white paint or pastle mat finish colour combination. Kanthal wire heating elements provided on three sides attain quick and uniform heating in range of 50C to 250C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase. OPTIONALS : Air circulating fan. Timer 0-24 hours Digital temperature Indicator. Digital temp indicator-cum-Controller Hot air oven, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11001 - (Hot air oven)

   
http://www.naugramedical.com/hot-air-oven

DRYING OVEN INDUSTRIAL

DRYING OVEN INDUSTRIAL Specification:- DRYING OVEN INDUSTRIAL Chamber Size : a) 900 x 600 x 600 (36x24x24") b) 1200 x 900 x 600 (48x36x24") c) 1500 x 900 x 900 (60x36x36") d) 1800 x 1200 x 900 (72x48x36") Optional : I) Timer 0-24 hours. Ii) Digital temp. Indicator -cum-Controller. Inner & output chamber : Thick mild steel sheet Make : Ajanta Standard double wall fabrication. Inner chamber backed silver paint finish and exterior finished in hammertone. Heavy duty forced air blowers are provided to constantly circulated hot air to achieve uniform temp. In the whole chamber. Double wall door is mounted on heavy hinges and provided with heavy moulded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50o C to 250o 2oC to 5oC and equipment is workable on 220 workable on 220V AC 50Hz single phase or 440 volts AC supply. Note: Please ask for the other capacities of your requirement. DRYING OVEN INDUSTRIAL, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11002 - (DRYING OVEN INDUSTRIAL)

   
http://www.naugramedical.com/drying-oven-industrial

TRAY DRYER

TRAY DRYER Standard sturdy double wall fabrication. Inner & outer chamber made out of thick mild steel sheet. Inner chamber backed silver paint finish and exterior finished in hammertone. Heavy duty forced air blower are provided to constantly circulate hot air to achieve uniform temperature in the hole chamber. Double wall door is mounted on heavy hinges and provided with heavy moulded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50oC to 250oC 2oC to 5oC and equipment is workable on 220 V AC 50Hz single phase or 440 volts A C supply. Specification : TRAY DRYER Chamber Size : a) 300 x 300 x 300 b) 350 x 350 x 350 c) 450 x 450 x 450 d) 600 x 450 x 450 e) 600 x 600 x 600 Tray Capacity : 8 trays of 16x32x1 size. 12 trays of 16x32x1 size. 24 trays of 16x32x1 size. 48 trays of 16x32x1 size. 96 trays of 16x32x1 size. Optionals : i) Timer 0-24 hours. ii) Digital temp. Indicator-cum-Controller. Iii) Aluminum Tray 16x32x1 size TRAY DRYER, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11003 - (TRAY DRYER)

   
http://www.naugramedical.com/tray-dryer

OVEN VACCUM

OVEN VACCUM Specification :- OVEN VACCUM Chamber Size : a) 250x300 12 ltrs. b) 300x300 17 ltrs. c) 300x500 40 ltrs. Ltrs Size : a) 12 ltrs. b) 17 ltrs. c) 40 ltrs. Optional Size : i) Timer 0-24 hours. ii) Imported Thermostat German, Accuracy of 0.1ÂC. iii) digital temp. Indicator-cum-Controller. Iv) Microprocessor PID digital temp. Indicator-cum-controller. Double walled construction. Inner round chamber made out of stainless steel, exterior made out of mild steel duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Temperature range 50oC to 130o, 3oC. The body capable of with standing vacuum of 760 mm hg. Workable on 220V AC 50 Hz single phase. Supplied without Vacuum pump OVEN VACCUM, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11004 - (OVEN VACCUM)

   
http://www.naugramedical.com/oven-vaccum

INCUBATOR

INCUBATOR Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet and outer made out of thick mild steel finished in white stoving enamel/powder coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temperature range 5 C above ambient to 80 C  1 C controlled by a thermostat. The equipment is workable on 220V Ac 50 Hz single phase. (Chambers size in mm/Inches) No. of Capacity H W D (Approx.) Shelves (Approx) a) 300 x 300 x 300 (12x12â€x12") 2 28 ltrs. b) 350 x 350 x 350 (14â€x14â€x14") 2 45 ltrs. c) 400 x 400 x 400 (16â€x16â€x16â€) 2 65 ltrs. d) 450 x 450 x 450 (18â€x18â€x18") 2 95 ltrs. e) 600 x 450 x 450 (24â€x18â€x18") 2 125 ltrs. f) 600 x 600 x 600 (24â€x24â€x24") 2 224 ltrs. g) 900 x 600 x 450 (36â€x24â€x18") 2 252 ltrs. h) 900 x 600 x 600 (36â€x24â€x24") 2 336 ltrs. i) 900 x 900 x900 (36â€x36â€x36") 3 480 ltrs. OPTIONAL : i) Air circulating fan. ii) Timer 0-24 hours iii) Imported Thermostat "JUMO" German with the accuracy of +0.5oC. iv) Digital temp indicator-cum-Controller. v) Microprocessor PID digital temp. Indicator-cum-controller INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11005 - (INCUBATOR)

   
http://www.naugramedical.com/incubator

B.O.D

B.O.D Double wall construction. Inner chamber made richly anodized aluminum or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in write stoving enamel/powder coated paint with mat finished colour combination. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Temperature is controlled by Delux Digital Controller from 5oC to 50o 0.5o C. Standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made with in the chamber for higher temperature working. Inner air circulating system is provided to achieve uniform temperature. A control panel is provided with various indicators, on-off switch. Supplied with cord and plug etc. To work on 220V AC 50 Hz single phase. OPTIONAL: i) Timer 0-24 hours day night cycle. ii) Co2 /air mixer nozzle is provided. iii) Internal illumination with 3 fluorescent tubes. iv) Microprocessor PID digital temp. Indicator-cum-controller. v) Automatic Voltage stabilizer 3-5 KVA (recommended-must). Inner Chamber Sizes in mm W x D x H (Approx.) Capacity in cu.ft. Capacity 405 x 405 x 405 (Bench Top Model) 2.4 cu.ft. 65 ltrs. 455 x 410 x 610 4 cu.ft. 112 ltrs. 505 x 415 x 830 6.1 cu.ft. 171 ltrs. 565 x 565 x 865 10 cu.ft. 280 ltrs. 650 x 580 x 900 12 cu.ft. 336 ltrs. 700 x 650 x 900 15 cu.ft. 420 ltrs. B.O.D, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11006 - (B.O.D)

   
http://www.naugramedical.com/bod

ORBITAL SHAKING INCUBATOR

ORBITAL SHAKING INCUBATOR Standard double wall construction. Outer chamber made out of mild steel finished in white stoving enamel/powder coated paint with mat finished colour combinations. Inner chamber made of stainless steel sheet. The double door is provided with double glass full view window. Interchangeable platform has been provided. OPTIONAL : i) Timer 0-24 hours. ii) Imported Thermostat iii) digital temp. Indicator-cum-Controller. Iv) Microprocessor PID digital temp. Indicator-cum-controller. Specification : ORBITAL SHAKING INCUBATOR Temperature Range : 5oC above ambient to 60oC + 1oC Speed Control : Upto 200 rpm Power Supply : 220V Ac 50Hz single phase Capacity : 16x500 ml conical flasks Make : Ajanta ORBITAL SHAKING INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11007 - (ORBITAL SHAKING INCUBATOR)

   
http://www.naugramedical.com/orbital-shaking-incubator

WALK-IN-INCUBATOR

WALK-IN-INCUBATOR Designed for vast number of incubation applications. Can be installed even in hallway room or wherever convenient. Design feature includes enameled mild steel sheet exterior, aluminium / stainless steel, interior ventilators, internal lighting, exhaust fan etc. Suitable insulated 300 mm sq. Inspection window at the door permits inside view with -out opening the door. Complete with panel. Pre fabricated at factory assembled at site. Complete with cord and plug to work on 220 V single phase 50 Hz power supply. Temperature range from 5Â C above ambient to 60Â C Â 1Â C. Controlled by digital indicator -cum -controller. Available sizes W x H x D a) 1.2x2.3x1.2 meter b) 2.3x2.3x2.3 mete WALK-IN-INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11008 - (WALK-IN-INCUBATOR)

   
http://www.naugramedical.com/walk-in-incubator

SEROLOGICAL WATER BATH (Thermostatic Water Bath)

SEROLOGICAL WATER BATH (Thermostatic Water Bath) Temperature range from ambient temperature to 80 C. Thermostatic control with accuracy of 0.5 C. Double walled, inside stainless steel and outside mild steel painted in epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangement, without racks and thermometer. Lid of water bath is made of stainless steel sheet. Size inside chamber (Stainless Steel) Capacity (Approx.) 300x200x175 mm (suitable for 2 racks) 14 ltrs. 375x300x175 mm (suitable for 4 racks) 18 ltrs. 455x300x175 mm (suitable for 6 racks) 25 ltrs. 605x300x175 mm (suitable for 8 racks) 32 ltrs. Optionals: L-shaped thermometer (fitted with water bath). Imported Thermostat “EGO” / “JUMO” German with an accuracy of 0.5 C Digital temp. indicator-cum-Controller. Microprocessor PID digital temp. Indicator-cum-controller. Stirrer with 1/20 H.P. High speed motor with stainless steel stirring rod and blade SEROLOGICAL WATER BATH (Thermostatic Water Bath), Heat And Refrigeration System Exporters, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11009 - (SEROLOGICAL WATER BATH (Thermostatic Water Bath))

   
http://www.naugramedical.com/serological-water-bath-thermostatic-water-bath

WATER BATH RECTANGULAR (Double wall)

WATER BATH RECTANGULAR (Double wall) Temperature range from ambient temperature to 95 C. Thermostatic control with an accuracy of 1 C. Double walled, inside stainless and outside mild steel sheet painted in epoxy powder coating. Top of the bath and concentric ring of stainless steel. To work on 220/230 volts A.C. Size inside Holes Capacity 300x250x100 mm 6 holes of 75 mm dia. 8 Ltrs 355x405x100 mm 12 holes of 75 mm dia 15 ltrs. OPTIONAL (i)Imported Thermostat with the accuracy of 0.5 C. (ii)Digital temp. indicator-cum-Controller. Make Ajanta WATER BATH RECTANGULAR (Double wall), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11010 - (WATER BATH RECTANGULAR (Double wall))

   
http://www.naugramedical.com/water-bath-rectangular-double-wall

OIL BATH (High temperature)

OIL BATH (High temperature) Double wall construction. Inner chamber made of highly polished stainless steel sheet and the outer is made of mild sl duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Temperature range 50 C to 250 C, 2 C is controlled by a thermostat. Supplied complete with stirrer, diffuser shelves, cover etc. Specification OIL BATH Chamber Size a) 250x250x250 mm (10x10Âx10Â) b) 300x300x250 mm (12Âx12Âx10Â) C) 350x350x250 mm (14Âx14Âx10Â) Optional (i) Mercury contact thermometer and relay with accuracy better than 1 C. (ii) Imported Thermostat with an accuracy of 1 C (iii) Digital temp. indicator-cum-Controller. (iv) Microprocessor PID digital temp. indicator-cum-controller. Make Ajanta OIL BATH (High temperature), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11011 - (OIL BATH (High temperature))

   
http://www.naugramedical.com/oil-bath-high-temperature

RECTANGULAR MUFFLE FURNACE (Laboratory model)

RECTANGULAR MUFFLE FURNACE (Laboratory model) Outer shell made out of thick mild steel duly finished in attractive stoving enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000Â C and working temp. 900Â C controlled by SUNVIC energy regulator. Complete with indicators, pyrometer,thermocuple, thermal fuse etc. Workable on 220V AC 50 Hz single phase. Specification :- MUFFLE FURNACE Inner Muffle size in mm Inner Muffle size in Inches a) 225x100x100 (9x4x4) b) 250x125x125 (10x5x5) c) 300x125x125 (12x5x5) d) 300x150x150 (12x5x5) e) 300x200x200 (12x6x6) f) 350x175x125 (14x7x5) g) 475x175x125 (19x7x5) h) 450x225x225 (18x9x9) RECTANGULAR MUFFLE FURNACE (Laboratory model), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11012 - (RECTANGULAR MUFFLE FURNACE (Laboratory model))

   
http://www.naugramedical.com/rectangular-muffle-furnace-laboratory-model

HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL)

HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL) These lab furnaces (0-1500C) are specially designed to meet the requirements of high temperature applications. In these furnaces, the casing is manufactured using MS reinforced with iron angles. Along with this, the chamber of these furnaces is made of ceramic Zirconium Board having horizontally placed elements. Heating is carried out through silicon carbide rods and controlled through transformer. The furnaces have large surface radiation ratio to enhance thermal efficiency and reduce power consumption. There is a control panel fitted with the furnaces and having digital temperature indicator cum controller. Features : Maximum furnace Temperature upto 1450C Working Temperature up to 1400C Operatable in 220 volts Single Phase AC supply Chamber Size (mm) 100 x 100 x 225 125 x 125 x 250 150 x 150 x 300 200 x 200 x 300 HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11013 - (HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL))

   
http://www.naugramedical.com/high-temperature-furnace-1200-c-industrial

HEATING MANTLE

HEATING MANTLE It with stands high temperature up to 350oC. The body of the mantle is spun in one piece from non-rusing Aluminium (up to 5.0 liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. All heating mantels are lagged with special grade mineral wool. Works on 220/230 Volts A.C. Capacity : Wattage : 50ml 60 100ml 60 250ml 150 500ml 200 1ltr 300 2ltr 450 3ltr 450 5 ltr 600 HEATING MANTLE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11014 - (HEATING MANTLE)

   
http://www.naugramedical.com/heating-mantle

HOT PLATE

HOT PLATE Body is fabricated out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the late to operate on 220 V 50 Hz single phase. Temp. Is controlled by a three-heat rotary switch/energy regulator as per demand. A) HOT PLATE: (ROUND) SINGLE Specification as above with 20 cm (8â€) dia. mounted top/SS Sheet top. B) HOT PLATE: (ROUND) DOUBLE As per EDI-75 but two plates of 20 cm (8â€) dia. Having independent Pilot lamps & switches. C) HOT PLATE (Rectangular) As per EDI-75 but plate is rectangular shape. Following Standard size is available: a) 30x25 cm (12'x10') b) 40x25 cm (16'x10') c) 45x30 cm (18'x12') d) 60x45 cm (24â€x18â€) OPTIONAL: i) Sunvic energy regulator can be provided against routine energy regulator. ii) Digital temp. Indicator-cum-controller. HOT PLATE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....

Product Code: NMCBS11015 - (HOT PLATE)

   
http://www.naugramedical.com/hot-plate