• HOME
  • ABOUT US
  • OUR PRODUCTS
  • Contact

Our Products

Heat And Refrigeration System

Heat And Refrigeration System China India - Naugramedical hospital and medical team, deliver the best of our Heat And Refrigeration Systems and Heat And Refrigeration Hospital Solutions. We have been successfully catering to the needs of our customer base which includes Heat And Refrigeration Equipments companies from all over the world. Heat and Refrigeration Systems Manufacturer factory in Chian, Heat and Refrigeration Systems Suppliers, Heat and Refrigeration Systems in India, Heat and Refrigeration Systems Exporter China, Heat and Refrigeration Systems, Refrigeration Systems Manufacturers in India.

Hot air oven

Product Code: NMCBS11001 - (Hot air oven)

Hot air oven Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet. Exterior fabricated out of thick milled steel sheet duly finished in shoved enamel off white paint or pastle mat finish colour combination. Kanthal wire heating elements provided on three sides attain quick and uniform heating in range of 50°C to 250°C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 V AC 50 Hz single phase. OPTIONALS : Air circulating fan. Timer 0-24 hours Digital temperature Indicator. Digital temp indicator-cum-Controller Hot air oven, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

DRYING OVEN INDUSTRIAL

Product Code: NMCBS11002 - (DRYING OVEN INDUSTRIAL)

DRYING OVEN INDUSTRIAL Specification:- DRYING OVEN INDUSTRIAL Chamber Size : a) 900 x 600 x 600 (36x24x24") b) 1200 x 900 x 600 (48x36x24") c) 1500 x 900 x 900 (60x36x36") d) 1800 x 1200 x 900 (72x48x36") Optional : I) Timer 0-24 hours. Ii) Digital temp. Indicator -cum-Controller. Inner & output chamber : Thick mild steel sheet Make : Ajanta Standard double wall fabrication. Inner chamber backed silver paint finish and exterior finished in hammertone. Heavy duty forced air blowers are provided to constantly circulated hot air to achieve uniform temp. In the whole chamber. Double wall door is mounted on heavy hinges and provided with heavy moulded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50o C to 250o 2oC to 5oC and equipment is workable on 220 workable on 220V AC 50Hz single phase or 440 volts AC supply. Note: Please ask for the other capacities of your requirement. DRYING OVEN INDUSTRIAL, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

TRAY DRYER

Product Code: NMCBS11003 - (TRAY DRYER)

TRAY DRYER Standard sturdy double wall fabrication. Inner & outer chamber made out of thick mild steel sheet. Inner chamber backed silver paint finish and exterior finished in hammertone. Heavy duty forced air blower are provided to constantly circulate hot air to achieve uniform temperature in the hole chamber. Double wall door is mounted on heavy hinges and provided with heavy moulded latch. Temperature is controlled by a thermostat and it can be read on dial type thermometer. Temperature range: 50oC to 250oC 2oC to 5oC and equipment is workable on 220 V AC 50Hz single phase or 440 volts A C supply. Specification : TRAY DRYER Chamber Size : a) 300 x 300 x 300 b) 350 x 350 x 350 c) 450 x 450 x 450 d) 600 x 450 x 450 e) 600 x 600 x 600 Tray Capacity : 8 trays of 16x32x1 size. 12 trays of 16x32x1 size. 24 trays of 16x32x1 size. 48 trays of 16x32x1 size. 96 trays of 16x32x1 size. Optionals : i) Timer 0-24 hours. ii) Digital temp. Indicator-cum-Controller. Iii) Aluminum Tray 16x32x1 size TRAY DRYER, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

OVEN VACCUM

Product Code: NMCBS11004 - (OVEN VACCUM)

OVEN VACCUM Specification :- OVEN VACCUM Chamber Size : a) 250x300 12 ltrs. b) 300x300 17 ltrs. c) 300x500 40 ltrs. Ltrs Size : a) 12 ltrs. b) 17 ltrs. c) 40 ltrs. Optional Size : i) Timer 0-24 hours. ii) Imported Thermostat German, Accuracy of 0.1ºC. iii) digital temp. Indicator-cum-Controller. Iv) Microprocessor PID digital temp. Indicator-cum-controller. Double walled construction. Inner round chamber made out of stainless steel, exterior made out of mild steel duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Temperature range 50oC to 130o, 3oC. The body capable of with standing vacuum of 760 mm hg. Workable on 220V AC 50 Hz single phase. Supplied without Vacuum pump OVEN VACCUM, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

INCUBATOR

Product Code: NMCBS11005 - (INCUBATOR)

INCUBATOR Standard double wall fabrication. Inner chamber made of richly anodized aluminum or highly polished stainless steel sheet and outer made out of thick mild steel finished in white stoving enamel/powder coated paint with mat finished colour combinations. Double wall door with double glass window for observation in the chamber. Temperature range 5º C above ambient to 80º C ± 1º C controlled by a thermostat. The equipment is workable on 220V Ac 50 Hz single phase. (Chambers size in mm/Inches) No. of Capacity H W D (Approx.) Shelves (Approx) a) 300 x 300 x 300 (12x12”x12") 2 28 ltrs. b) 350 x 350 x 350 (14”x14”x14") 2 45 ltrs. c) 400 x 400 x 400 (16”x16”x16”) 2 65 ltrs. d) 450 x 450 x 450 (18”x18”x18") 2 95 ltrs. e) 600 x 450 x 450 (24”x18”x18") 2 125 ltrs. f) 600 x 600 x 600 (24”x24”x24") 2 224 ltrs. g) 900 x 600 x 450 (36”x24”x18") 2 252 ltrs. h) 900 x 600 x 600 (36”x24”x24") 2 336 ltrs. i) 900 x 900 x900 (36”x36”x36") 3 480 ltrs. OPTIONAL : i) Air circulating fan. ii) Timer 0-24 hours iii) Imported Thermostat "JUMO" German with the accuracy of +0.5oC. iv) Digital temp indicator-cum-Controller. v) Microprocessor PID digital temp. Indicator-cum-controller INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

B.O.D

Product Code: NMCBS11006 - (B.O.D)

Cooling Incubator Refrigerated BOD Double wall construction. Hospital Cooling Incubator Refrigerated BOD Manufacturers India China

....


   

ORBITAL SHAKING INCUBATOR

Product Code: NMCBS11007 - (ORBITAL SHAKING INCUBATOR)

ORBITAL SHAKING INCUBATOR Standard double wall construction. Outer chamber made out of mild steel finished in white stoving enamel/powder coated paint with mat finished colour combinations. Inner chamber made of stainless steel sheet. The double door is provided with double glass full view window. Interchangeable platform has been provided. OPTIONAL : i) Timer 0-24 hours. ii) Imported Thermostat iii) digital temp. Indicator-cum-Controller. Iv) Microprocessor PID digital temp. Indicator-cum-controller. Specification : ORBITAL SHAKING INCUBATOR Temperature Range : 5oC above ambient to 60oC + 1oC Speed Control : Upto 200 rpm Power Supply : 220V Ac 50Hz single phase Capacity : 16x500 ml conical flasks Make : Ajanta ORBITAL SHAKING INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

WALK-IN-INCUBATOR

Product Code: NMCBS11008 - (WALK-IN-INCUBATOR)

WALK-IN-INCUBATOR Designed for vast number of incubation applications. Can be installed even in hallway room or wherever convenient. Design feature includes enameled mild steel sheet exterior, aluminium / stainless steel, interior ventilators, internal lighting, exhaust fan etc. Suitable insulated 300 mm sq. Inspection window at the door permits inside view with -out opening the door. Complete with panel. Pre fabricated at factory assembled at site. Complete with cord and plug to work on 220 V single phase 50 Hz power supply. Temperature range from 5º C above ambient to 60º C ± 1º C. Controlled by digital indicator -cum -controller. Available sizes W x H x D a) 1.2x2.3x1.2 meter b) 2.3x2.3x2.3 mete WALK-IN-INCUBATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

SEROLOGICAL WATER BATH (Thermostatic Water Bath)

Product Code: NMCBS11009 - (SEROLOGICAL WATER BATH (Thermostatic Water Bath))

SEROLOGICAL WATER BATH (Thermostatic Water Bath) Temperature range from ambient temperature to 80º C. Thermostatic control with accuracy of ± 0.5º C. Double walled, inside stainless steel and outside mild steel painted in epoxy powder coating. Bath consists of two pilot lamps. Temperature control knob and on/off switch. To work on 220/230 volts A.C. Supplied with or without stirring arrangement, without racks and thermometer. Lid of water bath is made of stainless steel sheet. Size inside chamber (Stainless Steel) Capacity (Approx.) 300x200x175 mm (suitable for 2 racks) 14 ltrs. 375x300x175 mm (suitable for 4 racks) 18 ltrs. 455x300x175 mm (suitable for 6 racks) 25 ltrs. 605x300x175 mm (suitable for 8 racks) 32 ltrs. Optionals: L-shaped thermometer (fitted with water bath). Imported Thermostat “EGO” / “JUMO” German with an accuracy of ± 0.5º C Digital temp. indicator-cum-Controller. Microprocessor PID digital temp. Indicator-cum-controller. Stirrer with 1/20 H.P. High speed motor with stainless steel stirring rod and blade SEROLOGICAL WATER BATH (Thermostatic Water Bath), Heat And Refrigeration System Exporters, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

WATER BATH RECTANGULAR (Double wall)

Product Code: NMCBS11010 - (WATER BATH RECTANGULAR (Double wall))

WATER BATH RECTANGULAR (Double wall) Temperature range from ambient temperature to 95º C. Thermostatic control with an accuracy of 1º C. Double walled, inside stainless and outside mild steel sheet painted in epoxy powder coating. Top of the bath and concentric ring of stainless steel. To work on 220/230 volts A.C. Size inside Holes Capacity 300x250x100 mm 6 holes of 75 mm dia. 8 Ltrs 355x405x100 mm 12 holes of 75 mm dia 15 ltrs. OPTIONAL (i)Imported Thermostat with the accuracy of 0.5º C. (ii)Digital temp. indicator-cum-Controller. Make Ajanta WATER BATH RECTANGULAR (Double wall), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

OIL BATH (High temperature)

Product Code: NMCBS11011 - (OIL BATH (High temperature))

OIL BATH (High temperature) Double wall construction. Inner chamber made of highly polished stainless steel sheet and the outer is made of mild sl duly finished in white stoving enamel/powder coated paint with mat finished colour combinations.

....


   

RECTANGULAR MUFFLE FURNACE (Laboratory model)

Product Code: NMCBS11012 - (RECTANGULAR MUFFLE FURNACE (Laboratory model))

RECTANGULAR MUFFLE FURNACE (Laboratory model) Outer shell made out of thick mild steel duly finished in attractive stoving enamel/powder coated paint. Fitted with grooved refractory for supporting the heating elements made out of kanthal wire and are easily replaceable. Maximum temp. 1000º C and working temp. 900º C controlled by SUNVIC energy regulator. Complete with indicators, pyrometer,thermocuple, thermal fuse etc. Workable on 220V AC 50 Hz single phase. Specification :- MUFFLE FURNACE Inner Muffle size in mm Inner Muffle size in Inches a) 225x100x100 (9x4x4) b) 250x125x125 (10x5x5) c) 300x125x125 (12x5x5) d) 300x150x150 (12x5x5) e) 300x200x200 (12x6x6) f) 350x175x125 (14x7x5) g) 475x175x125 (19x7x5) h) 450x225x225 (18x9x9) RECTANGULAR MUFFLE FURNACE (Laboratory model), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL)

Product Code: NMCBS11013 - (HIGH TEMPERATURE FURNACE 1200 C. (INDUSTRIAL))

1200°C High Temperature Laboratory Heat Treatment Muffle Furnace

....


   

HEATING MANTLE

Product Code: NMCBS11014 - (HEATING MANTLE)

HEATING MANTLE It with stands high temperature up to 350oC. The body of the mantle is spun in one piece from non-rusing Aluminium (up to 5.0 liters capacity) duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. All heating mantels are lagged with special grade mineral wool. Works on 220/230 Volts A.C. Capacity : Wattage : 50ml 60 100ml 60 250ml 150 500ml 200 1ltr 300 2ltr 450 3ltr 450 5 ltr 600 HEATING MANTLE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

HOT PLATE

Product Code: NMCBS11015 - (HOT PLATE)

HOT PLATE Body is fabricated out of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. The hot plate made of cast iron or top is made of highly polished stainless steel sheet precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy duty heating elements are securely layed under the late to operate on 220 V 50 Hz single phase. Temp. Is controlled by a three-heat rotary switch/energy regulator as per demand. A) HOT PLATE: (ROUND) SINGLE Specification as above with 20 cm (8”) dia. mounted top/SS Sheet top. B) HOT PLATE: (ROUND) DOUBLE As per EDI-75 but two plates of 20 cm (8”) dia. Having independent Pilot lamps & switches. C) HOT PLATE (Rectangular) As per EDI-75 but plate is rectangular shape. Following Standard size is available: a) 30x25 cm (12'x10') b) 40x25 cm (16'x10') c) 45x30 cm (18'x12') d) 60x45 cm (24”x18”) OPTIONAL: i) Sunvic energy regulator can be provided against routine energy regulator. ii) Digital temp. Indicator-cum-controller. HOT PLATE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

SLIDE WARMING TABLE

Product Code: NMCBS11016 - (SLIDE WARMING TABLE)

SLIDE WARMING TABLE Temperature range ambient temp. To 70º C i.e. Below the melting points of wax. The temperature is thermostatically controlled. The body is the made out of thick mild steel duly finished in white stoving enamel/powder coated paint with mat finished colour combinations and top is made of highly polished aluminium sheet. To work on 220 V 50 Hz single phase Top plate size (Length x Width) a) 30x25 cm (12”x10”) b) 40x25 cm (16”x10”) c) 45x30 cm (18”x12”) d) 60x15 cm (24”x6”) SLIDE WARMING TABLE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Melting Point Apparatus

Product Code: NMCBS11017 - (Melting Point Apparatus)

Melting Point Apparatus For determination of melting points up 450°c.  Manufacturers India China

....


   

SOXHLET EXTRACTION UNIT (Mantel type)

Product Code: NMCBS11018 - (SOXHLET EXTRACTION UNIT (Mantel type))

SOXHLET EXTRACTION UNIT (Mantel type) Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts are duly chrome plated. Housing provided with heating mantels for surface temp. Up to 300º C. Provided with a common energy regulator to control all unit, individual on-off switches & pilot lamps. To work on 220 V AC. Without glass parts. a) The unit of 3 mantles rating 500 watts. b) The unit of 6 mantles rating 750 Watts. A) SOXHLET EXTRACTION UNIT:(Heater type) Heaters have individual on-off switches & indicators. Provided with a common energy regulator to control all units. Without glass parts. 1) A unit of 3 heaters. 2) A unit of 6 heaters. B) SOXHLET EXTRACTION UNIT:(Hot plate type) 1) A unit of 3 heaters. 2) A unit of 6 heaters. C) SOXHLET EXTRACTION UNIT:(Bath type) I. Single wall - chamber made of stainless steel and provided with individual on- off switches but having on energy regulator to Control all units. Without glass parts. a) A unit of 3 baths. b) A unit of 6 baths. II. Double wall - inner chamber made of stainless steel, other specification as above. Without glass parts. a) A unit of 3 baths. b) A unit of 6 baths. OPTIONAL: Sunvic energy regulator can be provided with all above units. SOXHLET EXTRACTION UNIT (Mantel type), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

AUTOCLAVE

Product Code: NMCBS11019 - (AUTOCLAVE)

AUTOCLAVE Suitable for general laboratory use and sterilization. Stainless steel or aluminum vertical body. Domed cover can be sealed by joint-less gasket which is clamped to the vessel by wing nuts by hinged bolts which engage slotted lugs on rim of the cover. Provided with dial pressure gauge. Spring loaded safety valve has threaded cp for pressure adjustments. Supplied complete with plug & cord and is suitable to work on 2 20V AC 50Hz single phase. Specification :- AUTOCLAVE Size : a) 300x300 mm [Seamless] b) 300x375 mm [Jointed] c) 300x500 mm [Jointed] Pressure range : 15 psi to 18 psi Make : Ajanta AUTOCLAVE , Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

HORIZONTAL AUTOCLAVE

Product Code: NMCBS11020 - (HORIZONTAL AUTOCLAVE)

HORIZONTAL AUTOCLAVE Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and Outer chamber is made of stainless steel/mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation . Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with Pressure control switch. SPECIFICATION:- HORIZONTAL AUTOCLAVE SIZE KILLO-WATT CAPACITY 300 x 500 mm 3 KW 40 ltrs 350 x 550 mm 4 KW 50 ltrs. 400 x 600 mm 5 KW 78 ltrs. 450 x 600 mm 5 KW 98 ltrs. 500 x 750 mm 6 KW 152 ltrs. 400 x 1000 mm 9 KW 162 ltrs. PRESSURE RANGE 10 t0 20 psi HORIZONTAL AUTOCLAVE, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

HUMIDITY CABINET

Product Code: NMCBS11021 - (HUMIDITY CABINET)

HUMIDITY CABINET Temperature range ambient temperature to 60º C. Temperature 1º C with built-in horizontal shape thermometer. The humidity is controlled by Humidistart from atmospheric humidity num/Stainless steel and outside Mild steel painted in epoxy powder coating. The door has glass window. To work on 220/230 volts A.C. Inside water tank is made of stainless steel. Specification :- HUMIDITY CABINET Chamber Inside Chamber (Size) CAPACITY 455 x 455 x 455 mm 95 ltrs 455 x 455 x 710 mm 147 ltrs 605 x 605 x 605 mm 225 ltrs 605 x 605 x 910 mm 335 ltrs OPTIONAL (i) Hygrometer (Humidity indicator). (ii) Digital temperature controller-cum-indicator. (iii) Imported thermostat “EGOâ€Â/â€ÂJUMOâ€Â German with the accuracy of 0.5º C. (iv) Microprocessor PID digital temp. Indicator-cum-controller. (v) Automatic electronic controller with digital display for Temp.& Humidity combined. (vi) Automatic voltage stabilizer 3 KVA (recommended). Make Ajanta HUMIDITY CABINET, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

MORTUARY CHAMBER / FREEZER

Product Code: NMCBS11022 - (MORTUARY CHAMBER / FREEZER)

MORTUARY CHAMBER / FREEZER Used to storing cadaverous under low temperature cool condition in order to prevent decomposition. These units are double walled with outer made of M.S. sheet duly painted and inner wall of stainless steel. Front opening covered door with magnetic gasket lock & key and handle individual chambers are provided independent lock with duplicate keys. Trays made of G.l. sheet to carry dead bodies are provided with handles. Trays travel on rollers fitted with ball bearing for easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain temperature range of 2º C to 5º C or (-) 15º C to (-) 20º C (as ordered) Unit is fitted with Digital Temperature Indicator-cum-controller. Works on 220/230 volts A.C. Power supply. Capacity Temp. Temp. Voltage Stabilizer a) Single Body 2º to 5º C -15º to -20º C 3 KVA b) Two Bodies 2º to 5º C -15º to -20º C 4 KVA c) Three Bodies 2º to 5º C -15º to -20º C 5 KVA d) Four Bodies 2º to 5º C -15º to -20º C 8 KVA e) Six Bodies 2º to 5º C -15º to -20º C 8 KVA MORTUARY CHAMBER / FREEZER, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

BLOOD BANK REFRIGERATOR

Product Code: NMCBS11023 - (BLOOD BANK REFRIGERATOR)

BLOOD BANK REFRIGERATOR Blood Bank chamber is a most versatile unit for Blood Bank mounted on a sturdy angle frame. The inner chamber is made up of stainless steel sheet and outer of mild steel sheet duly powder coated paint. Caster wheels provided for easily mobility. The temperature is maintained in 4º C to 6º C with forced air circulation ensures uniform temperature, for storing blood bottles or blood bags. Temperature is controlled by Microprocessor PID digital temperature controlled-cum-indicator and triggers the AUDIO VISUAL ALARM in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with DOOR OPERATED ALARM and POWER SUPPLY FAILURE ALARM, as a safety devices. A highly efficient refrigeration system consists of hermetically sealed compressor, for high performance cooling coil runs all around the cabinet to maintain uniformity of temperature. The entire refrigeration unit is housed at bottom. Two doors are provided. Inner door is of transparent acrylic sheet for easy viewing inside the chamber. Outer door is duly insulated for proper sealing from external environment and is lock able. Drawers provided for holding bags. Suitable BLOOD BANK REFRIGERATOR, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

VACCINE STORAGE CABINET

Product Code: NMCBS11024 - (VACCINE STORAGE CABINET)

VACCINE STORAGE CABINET Vaccine storage cabinet, the most versatile unit for vaccine for storage. Inner chamber made of stainless steel external mild steel sheet body of rigid steel frames. Insulated thoroughly provided with face fitting doors, complete with self-closing hinges lockable fasteners. Cabinet is fully sealed to avoid spilling and contamination from external environment. Temp. ranges from 4º C to 6º C. Available in various sizes for keeping vaccines bottles. Drawers with clear Perspex front and index card holders. Temperature controlled and displayed by Microprocessor PID digital temperature controlled-cum-indicator. Audio visual alarms are triggered, in the event of fluctuations exceeding permitted tolerance level. Suitable to work on 220 V, single phase, 50hz, AC supply. Available in following size:- a) 450x400x850 mm. b) 600x675x850 mm. OPTIONAL: i) Chart type Temperature recorder. ii) Voltage Stabilizer. (Recommended) VACCINE STORAGE CABINET, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

DEEP FREEZER

Product Code: NMCBS11025 - (DEEP FREEZER)

DEEP FREEZER Double walled with inner chamber made of S.S and outer of thick PCRC sheet duly enamel painted. Temperature range from ambient to -20º C is achieved by hermetically sealed compressor. Body is mounted on a sturdy angle iron frame and id mounted on caster wheels. Unit is fitted with solid State Digital Temperature Indicator-Cum-Controller. Horizontal Chest type models are supplied in a single compartment where as vertical models are supplied with three stainless still storing shelves. Specification DEEP FREEZER Capacity 4 cuft. 6 cuft. 10 cuft. 12 cuft. Optional Supply with automatic voltage stabilizer. Make Ajanta DEEP FREEZER, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

DE-HUMIDIFIER

Product Code: NMCBS11026 - (DE-HUMIDIFIER)

DE-HUMIDIFIER, Medical Electric Portable Dehumidifier Exporters, Hospital Lab Electric Portable Dehumidifier Manufacturers

....


   

Water Bath Rectangular Thermostatic

Product Code: NMCBS11027 - (Water Bath Rectangular Thermostatic)

Water Bath Rectangular Thermostatic We offer water bath in rectangular thermostatic and that are of double walled construction. Their exteriors are made of mild steel powder coated and the interiors are made of stainless steel. These water baths are available in various specifications thus meeting the varied needs of our clients. We offer these water bath at most competitive rates. Water Bath Rectangular Thermostatic, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Stability Chambers

Product Code: NMCBS11028 - (Stability Chambers)

Stability Chambers We offer a wide range of stability chambers that are precisely designed to create test chambers for carrying out studies on various environmental parameters such as humidity and temperature. These are also used in various application tests involving plants, tissues, microorganism and electronic components. These are available in two models STD (Outer M.S & Inner S.S) and GMP model (complete S.S.). Some of the specifications are: • Double walled construction inner SS – outer MS • 3 gap puff insulation • Full length inner glass door for clear inner vies • Outer metal door with magnetic gaskets & lock • Forced air circulation for uniform temperature throughout the chamber • Dual display preset electronic digital temperature controller cum indicator • Cooling system by means of hermetically sealed compressor unit coupled with evaporation coil and condenser • Temp. Range 10ºc to 60ºc1ºc • Humidity range 40% Rh to 98% Rh 3% Rh Our range is available in following models: Order Code Capacity Cu.ft Ltrs Inner Dimensions H x D x W (cms) No. of Shelves AEI-3a 3 cft 90Ltrs 50 x 43 x 43 2 AEI-3b 6 cft 180Ltrs 70 x 51 x 51 2 AEI-3c 10 cft 300Ltrs 100 x 55 x 55 3 AEI-3d 12 cft 360Ltrs 100 x 60 x 60 3 AEI-3e 16 cft 480Ltrs 114 x 65 x 65 4 Stability Chambers, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Laboratory Oven

Product Code: NMCBS11029 - (Laboratory Oven)

Laboratory Oven Our company is engaged in offering a wide range of laboratory ovens (Hot Air Oven) that is widely used in variety of thermal processing. These also find application in general lab work component and stability testing, core hardening, drying glassware and sterilizing. Some of the features are: • Double walled – outer mild steel & inner mild steel or stainless steel. • 80/20 Ni heating elements • Temperature range : 5ºc above ambient to 300ºc 2ºc • 230v ac 50 Hz mains supply • Digital temperature controller Our range of laboratory oven is available in following given models: Models Chamber H x W x D (cms) Watts Shelves AEI-20a 30 x 30 x 30 750 1 AEI-20b 35 x 35 x 35 1000 2 AEI-20c 45 x 45 x 45 1500 2 AEI-20d 45 x 45 x 60 1750 2 AEI-20e 60 x 60 x 60 2000 3 AEI-20f 45 x 60 x 90 2200 3 AEI-20g 60 x 60 x 90 2500 3 Laboratory Oven, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Shaking Machines

Product Code: NMCBS11030 - (Shaking Machines)

Shaking Machines We offer a comprehensive range of shaking machines that is commonly used in biology labs of leading educational institutions as well as research organizations. These shaking machines are platform type mounted on heavy-duty mild steel angle frame fitted with heavy cast iron pulleys. Our range of shaking machines is electronically driven by PMDC motor, which offers rotary shaking action. These have an operating speed of 200 rpm and are available with variable speed varying from 50 to 200 rpm. Some of the specifications of these shaking machines are: • Flexible spring action lotus shaped clamps • One tray is provided for holding flasks of 500 ml • Capacity: 230v ac 50hz These shaking machines are available in following models: Model Capacity To hold Flasks Platform Size L x B (cams) AEI-25a 9 x 500ml. 50 x 50 AEI-25b 12 x 500ml. 50 x 50 AEI-25c 16 x 500ml 60 x 60. AEI-25d 25 x 500ml 75 x 75 AEI-25e 36 x 500ml 80 x 80 AEI-25f 49 x 500ml 90 x 90 AEI-25g 100 x 500ml 120 x 120 Shaking Machines, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Humidity Control Ovens

Product Code: NMCBS11031 - (Humidity Control Ovens)

Humidity Control Ovens Available in two different models. STD Model & GMP Model. Exterior made of mild steel with powder coated finish and interior made of stainless steel 304.(STD Model) & Exterior made of stainless steel 304 and Interior made of stainless steel 316.(GMP Model) 3” gap puff insulation. Stainless Steel perforated S.S trays Full length inner glass door for clear inner view. Outer Metal Door with magnetic gasket & lock. Air Circulation: Forced air circulation fan for uniform temperature throughout the chamber. Controller: Dual display PID Temperature controller cum Indicator with digital display of temperature & Humidity. Heating & Cooling system: ISI marked heaters take care of temperature above ambient where as hermetically sealed eco friendly compressor maintains temperature below ambient.. Temperature Range: 10°C to 60°C+/-1°C. Humidity Range: 40% Rh to 95% Rh+/-3% Rh Humidity Control Ovens, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Orbital Shaking Incubators

Product Code: NMCBS11032 - (Orbital Shaking Incubators)

Orbital Shaking Incubators Double Walled Inner SS / Outer MS; Temperature Range: 10ºC to 60ºC0.5ºC Preset dual display electronic digital temperature controller cum indicator; RPM Range: 50 to 250 RPM Orbital (25 cms) Variable Speed Controlled by Digital Display RPM Controller cum Indicator (Permanent Management DC Motor) Complete with St. Steel Tray with lotus shaped spring action clamps Orbital Shaking Incubators, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

B.O.D.Incubators

Product Code: NMCBS11033 - (B.O.D.Incubators)

B.O.D.Incubators We offer B.O.D. incubators that are designed primarily to meet requirements of bio chemical oxygen demand test. These equipments are suitable for storage of sensitive cultures, vaccines, culture of bacteria, micro organism, serum incubation, seed germination etc. Some of the specifications of these incubators are: •Double walled construction – Inner Chamber S.S –Outer M.S powder Coated (STD Model) or Interior & Exterior made of Stainless Steel 304… •Puff Insulation; •Full length inner Plexi glass door for clear inner view; •Outer Metal Door with magnetic gaskets & lock. •Perforated SS removable trays at adjustable distance; •Preset electronic dual display (one for set point and the other for process value) digital controller cum Indicator with pt 100 as sensor. •Pilot lamps for all switches & controls, illumination provided for inner chamber •Forced air circulation fan for uniform temperature throughout the chamber. •Hermetically sealed compressor unit; •Castor wheals for easy move ability. •Temperature Range 5ºC to 60 ºC0.5 ºC or better. 230V Ac 50HZ Mains •Temperature Accuracy : ± 0.5 °C Further, the technical specifications are as follows: Order Code Capacity Cu.ft Ltrs Inner Dimensions H x D x W (cms) No. of Shelves AEI - 1a 3 cft 90L 50 x 43 x 43 2 AEI - 1b 6 cft 180L 70 x 51 x 51 2 AEI - 1c 10 cft 300L 100 x 55 x 55 3 AEI - 1d 12 cft 360L 100 x 60 x 60 3 AEI - 1e 16 cft 480L 114 x 65 x 65 4 B.O.D.Incubators, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Ultra Low Temperature Deep Freezer-80C

Product Code: NMCBS11034 - (Ultra Low Temperature Deep Freezer-80C)

Ultra Low Temperature Deep Freezer-80C We offer a wide range of ultra low temperature deep freezer that provides an ideal freezing environment for advanced medical and industrial applications. These are basically used in prevention of plasma, related blood components, vaccines, micro-organism, and testing of materials and electronic components at -80 Deg C. Some of the features are: • Construction - Double Walled Construction, Exterior made of mild steel powder coated & interior made of stainless steel 304 (STD Model) or Exterior & interior made of stainless steel 304 (GMP Model) • High density CFC Free Poly Urethane Foam insulated cabinet • Keyed door lock for improved security with magnetic door gasket. • Full Length inner glass door for clear inner view. • Environment friendly Ultra Bio Freezers with micro control and CFC free cascade refrigeration system. • Air cooled, hermetically sealed compressor unit. • Temperature Range: -80°C controlled by microprocessor based temperature controllers. • Temperature alarm system with adjustable high - low alarm limits includes audio visual alarm on temperature deviation. • 230V Ac 50 HZ Mains. Further, the technical specifications are as follows: Order Code Capacity Cu.ft Ltrs Inner Dimensions H x D x W (cms) No. of Shelves AEI - 5a 3 cft 100L 50 x 45 x 45 2 AEI - 5b 6 cft 180L 70 x 51 x 51 2 AEI - 5c 10 cft 300L 100 x 55 x 55 3 Ultra Low Temperature Deep Freezer-80C, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Low Temperature Freezer (Vertical Model)

Product Code: NMCBS11035 - (Low Temperature Freezer (Vertical Model))

Low Temperature Freezer (Vertical Model) Our company offers low temperature freezers that are designed for freezing and storing of serum, vaccines, biological and medical specimens, clinical samples etc. at low temperature. These freezers are known for their robust construction, high efficiency and long service life. Some of the features of these freezers are: • The System includes micro controller based PID temperature controller with digital temperature display of set value and process value. • Temperature alarm system with adjustable high - low alarm limits includes audio visual alarm on temperature deviation. • High density CFC Free Poly Urethane Foam insulated cabinet with corrosion resistant stainless steel interior; Mild Steel powder coated exterior finish (STD Model). OR Exterior & Interior made of stainless steel 304 (GMP Model). • Keyed door lock for improved security with magnetic door gasket. • Full length inner glass door for clear inner view • Open stainless steel utility baskets, • Air-cooled, hermetically sealed compressor unit coupled with evaporation coil and condenser. • Temperature range Ambient to -20°C, -40°C • Resolution : +/-1°C Low Temperature Freezer (Vertical Model), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Deep Freezer Refrigerators

Product Code: NMCBS11036 - (Deep Freezer Refrigerators)

Deep Freezer Refrigerators Our company offers freezers that are designed for freezing and storing of serum, vaccines, biological and medical specimens, clinical samples etc. at low temperature. These freezers are known for their robust construction, high efficiency and long service life. Some of the features of these freezers are: • The System includes micro controller based PID temperature controller with digital temperature display of set value and process value.• Temperature alarm system with adjustable high - low alarm limits includes audio visual alarm on temperature deviation.• High density CFC Free Poly Urethane Foam insulated cabinet with corrosion resistant stainless steel interior; Mild Steel powder coated exterior finish (STD Model). OR Exterior & Interior made of stainless steel 304 (GMP Model).• Keyed door lock for improved security with magnetic door gasket.• Full length inner glass door for clear inner view• Open stainless steel utility baskets,• Air-cooled, hermetically sealed compressor unit coupled with evaporation coil and condenser.• Temperature range Ambient to -20°C, -40°C• Resolution : +/-1°C Deep Freezer Refrigerators, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Industrial Refrigerators

Product Code: NMCBS11037 - (Industrial Refrigerators)

Industrial Refrigerators We offer a wide range of Refrigerators that provides an ideal freezing environment for advanced medical and industrial applications. These are basically used in prevention of plasma, related blood components, vaccines, micro-organism, and testing of materials and electronic components at -80 Deg C. Some of the features are: • Construction - Double Walled Construction, Exterior made of mild steel powder coated & interior made of stainless steel 304 (STD Model) or Exterior & interior made of stainless steel 304 (GMP Model)• High density CFC Free Poly Urethane Foam insulated cabinet• Keyed door lock for improved security with magnetic door gasket.• Full Length inner glass door for clear inner view.• Environment friendly Ultra Bio Freezers with micro control and CFC free cascade refrigeration system.• Air cooled, hermetically sealed compressor unit.• Temperature Range: -80°C controlled by microprocessor based temperature controllers.• Temperature alarm system with adjustable high - low alarm limits includes audio visual alarm on temperature deviation.• 230V Ac 50 HZ Mains. Further, the technical specifications are as follows: Order Code Capacity Cu.ft Ltrs Inner Dimensions H x D x W (cms) No. of ShelvesGS - 5a 3 cft 100L 50 x 45 x 45 2GS - 5b 6 cft 180L 70 x 51 x 51 2GS - 5c 10 cft 300L 100 x 55 x 55 3 Industrial Refrigerators, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Horizontal Deep Freezers

Product Code: NMCBS11038 - (Horizontal Deep Freezers)

Horizontal Deep Freezers We manufacture Deep Freezer for various industries Pharmaceuticals, Chemical Industries.High Quality stainless steel is used to manufacture the chambers of thick gauge and is duly polished and welded to make them completely leak proof. These are available in two models i.e. horizontal & vertical with various capacities and temperature ranges. Some salient features of Deep Freezers manufactured by us are as follows:Cabinet in all sides 2" - 6" put insulation.Main door (Insulated with Puff) provided with silicon gasket to seal chamber from atmospheric pressure. Mild steel outer body is powder coated for lasting finish and corrosion resistance.Air cooled single stage (for -20°C and -40°C)Used with hermetically sealed compressorsControlled with digital indicator cum controller Moreover, we offer custom based freezers with Power failure alarms / temperature raise alarms/voltage stabilizer with high voltage low voltage cut-offs and other advance options. Horizontal Deep Freezers, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Vertical Deep Freezer

Product Code: NMCBS11039 - (Vertical Deep Freezer)

Vertical Deep Freezer We manufacture Deep Freezer for various industries Pharmaceuticals, Chemical Industries.High Quality stainless steel is used to manufacture the chambers of thick gauge and is duly polished and welded to make them completely leak proof.

....


   

Laboratory Oven (Hot Air Oven)

Product Code: NMCBS11040 - (Laboratory Oven (Hot Air Oven))

Laboratory Oven (Hot Air Oven) We offer laboratory ovens that are used in a variety of thermal processing applications including general lab work, component and stability testing, core hardening, drying glassware, and sterilizing. These are known for their robust construction, low maintenance and high efficiency. Some of the features are as follows: •Double Walled Construction •Exterior & Interior made of stainless steel 304/316 ( GMP model) or Exterior made of Mild Steel with powder coating finish and interior made of stainless steel 304 (STD Model) •80/20 Ni Heating Elements placed at bottom •Temp. Range : 5ºC above ambient to 300ºC 2ºC •230V AC 50HZ Mains Supply. •Digital Temperature Controller. •Fan arrangement for forced air circulation. Models Chamber H x W x D (cms) Watts Shelves AEI-20a 30 x 30 x 30 750 1 AEI-20b 35 x 35 x 35 1000 2 AEI-20c 45 x 45 x 45 1500 2 AEI-20d 45 x 45 x 60 1750 2 AEI-20e 60 x 60 x 60 2000 3 AEI-20f 45 x 60 x 90 2200 3 AEI-20g 60 x 60 x 90 2500 3 Laboratory Oven (Hot Air Oven)....


   

Hot Air Oven Memmert

Product Code: NMCBS11041 - (Hot Air Oven Memmert)

Hot Air Oven Memmert We offer hot air laboratory ovens that are used in a variety of thermal processing applications including general lab work, component and stability testing, core hardening, drying glassware, and sterilizing. These are available in various specifications thus meeting the varied needs of our clients. Some of the features are as follows: •Double Walled – Outer MS – Inner MS or St.Steel. •80/20 Ni Heating Elements placed at two vertical sides in addition to the bottom one for uniform heating in the chamber. •Fan arrangement for forced air circulation through out the chamber. •Temp. Range : 5ºC above ambient to 300ºC 2ºC •230V AC 50HZ Mains Supply. •Digital Temperature Controller. Hot Air Oven Memmert, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Vacuum Oven S (Round & Rectangular)

Product Code: NMCBS11042 - (Vacuum Oven S (Round & Rectangular))

Vacuum Oven S (Round & Rectangular) We offer a wide range of vacuum ovens that are specially designed to provide excellent vacuum & temperature. These are manufactured from quality materials thus providing maximum satisfaction to our clients. We offer these ovens at most competitive prices. Some of the features are as follows: •Construction: Double walled construction, Interior made thick stainless steel 304 & Exterior made of mild steel powder coated finish. •Insulation: The gap between the walls is filled with high grade mineral glass wool. •Door: Aluminum casting door with silicone rubber gasket. Door fitted with Toughened glass window for inner observation. •Temperature control: Digital display temperature controller / Micro Processor based PID controller. •Temperature Range: 5ºC above ambient to 130 ºC/250 ºC •Vacuum gauge & Cock provided. •0 to 760 mm of Hg vacuum Vacuum Oven S (Round & Rectangular), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Water Baths Constant Temperature (Precision)

Product Code: NMCBS11043 - (Water Baths Constant Temperature (Precision))

Water Baths Constant Temperature (Precision)We offer a wide range of water baths with constant temperature. Our range of water baths are including water bath (round), water baths round thermostatic , water baths (rectangular), water bath rectangular thermostatic , water baths universal and water bath serological etc. Some of the features are: •Rectangular in shape •Double walled –Inner SS – Outer MS/ Complete S.S •Temperature Range : 5ºC above ambient to 95ºC ±0.1ºC; •Water circulatory pump with stirrer-Precision model- •Digital Electronic Preset Temperature controller and Immersion Heaters. Water Baths Constant Temperature (Precision), Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Water Baths Thermostatic

Product Code: NMCBS11044 - (Water Baths Thermostatic)

Water Baths Thermostatic We are offering a wide range of water baths thermostatic that are fabricated from top quality materials as per the international quality standards. These water baths are known for their high efficiency, robust construction and corrosion resistant. Some of the features are: •Double walled construction •Inner made of stainless steel 304 & Outer made of mild steel with powder coating finish. •Temperature controlled by Thermostat. •Temperature Range : 5ºC above ambient to 95 ºC •6 or 12 holes 7.5cm dia with set of concentric rings for each hole.....


   

Viscosity Bath

Product Code: NMCBS11045 - (Viscosity Bath)

Viscosity Bath We offer a wide range of viscosity bath that are widely used for tests in the field of medical, agricultural, bio- chemical, research & development laboratories. These baths are of double walled construction, exterior made of mild steel powder coated, interior made of stainless steel 304 with puff insulation, S.S lid on top with the provision of viscometer holders. Full size toughened glass windows at front & back side of the bath with illumination arrangement. Some of the technical specifications of these water baths are: Circulation: Water circulation by AC/DC geared motor stirrer mounted on a base and fitted on the top of the bath. Heaters: S.S tubular heaters for maintain temperature. Refrigeration System: Hermetically sealed compressor provides temperature for below ambient conditions. Refrigerant: CFC free. Temperature Controller: Digital Temperature controller with PT-100 sensor. Temperature Range: 5ºC above ambient to 95 ºC Accuracy: ± 0.5 ºC Viscosity Bath, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Clear Bottom Round Oil Bath

Product Code: NMCBS11046 - (Clear Bottom Round Oil Bath)

Clear Bottom Round Oil Bath We offer a wide range of oil baths that are designed to accommodate round bottom flasks with seat cover. Temperature Range: 300 Degree C
Size: 1 - 10 Ltrs

....


   

Serological Water Bath

Product Code: NMCBS11047 - (Serological Water Bath)

Serological Water Bath Availble in two different models - exterior made of mild steel powder coated and interior made of stainless steel 304(std model) with piramidal ss lid & exterior made of stainless steel 304 and interior made of stainless steel 316 (gmp model) with piramidal ss lid. temperature range: 5deg. C above ambient to 85deg. C +/-2deg. C .....


   

Autoclaves (Steriliser) Portable

Product Code: NMCBS11048 - (Autoclaves (Steriliser) Portable)

Autoclaves (Steriliser) Portable We offer a wide range of autoclaves that are sterilize and are portable one. These autoclaves can work on gas or electricity. The container is made of aluminum or stainless steel. The Lid is fitted with pressure gauge & safety valve which is adjusted to blow off the steam at 12 psi maintaining constant pressure of 15 psi. Further, the technical specifications of these incubators are: Size MOC Cap (Liters) Size (cm) (Dia x Ht) AEI-14a Aluminium 20 30 x 30 AEI-14B St.Steel 20 30 x 30 , Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Autoclaves Vertical

Product Code: NMCBS11049 - (Autoclaves Vertical)

Autoclaves Vertical We are offering a wide assortment of autoclaves in vertical sizes. These autoclaves are manufactured from quality materials thus providing maximum satisfaction to our clients. Some of the features of these autoclaves are: •Double Walled inside made of thick stainless steel and outer body of heavy gauge mild steel attractively painted (STD Model)or interior and exterior made of stainless steel 304 (GMP Model). •Lid is of SS die pressed and fitted to the body / container tank by means of wing nuts & bolts working for fly nut system. •The lid is fitted with a pressure gauge, safety valve, steam release cock and extra safety valve. •Max pressure 20 psi / Working Pressure 15 psi. •Tested up to 40 psi. •Foot Pedal Lifting Arrangement (Optional) •Water Level Arrangement (Optional) •Perforated SS Basket (Optional) •Automatic Pressure Switch to out off supply at set pressure (Optional). •Radial Locking System (Chrome Plated) with paddle lifting device In place of Wing nut System (Optional) Further, the technical specifications of these incubators are: Size Size Dia x Ht. Cap (Litre) Rating (KW) a) 25 x 45 22 1.5 b) 30 x 50 35 2 c) 35 x 55 53 3 d) 45 x 60 95 4 e) 45 x 75 119 4.5 f) 55 x 75 178 6 g) 55 x 90 210 8 Autoclaves Vertical, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   

Low Temperature Cryostat Baths/Recirculators

Product Code: NMCBS11050 - (Low Temperature Cryostat Baths/Recirculators)

Low Temperature Cryostat Baths/Recirculators Our company also offers low temperature cryostat baths that are of mild steel exterior finished with powder coating paint. Theses baths are made of S.S and have immersion type heaters for accuracy of temperature, with PUF insulation. We offer two types of baths i.e., Table Top and Floor Models. Model Temp. Range Capacity (Ltr.) Chamber Dimension W x D x L (cms) Bath Opening (cms) Table top models AEI-34a 0º to 50ºC 12 Ltr 20 x 15 x 45 20 x 20 AEI-34b -20º to 50ºC 12 Ltr 20 x 15 x 45 20 x 20 AEI-34c -40º to 50ºC 12 Ltr 20 x 15 x 45 20 x 20 Floor models AEI-34d 0º to 50ºC 15 Ltr 20 x 17 x 45 20 x 20 AEI-34e -20º to 50ºC 15 Ltr 20 x 17 x 45 20 x 20 AEI-34f -40º to 50ºC 15 Ltr 20 x 17 x 45 20 x 20 AEI-34g 0º to 50ºC 25 Ltr 25 x 20 x 52 25 x 25 AEI-34h -20º to 50ºC 25 Ltr 25 x 20 x 52 25 x 25 AEI-34i -40º to 50ºC 25 Ltr 25 x 20 x 52 25 x 25 Low Temperature Cryostat Baths/Recirculators, Heat And Refrigeration System Exporters, Heat And Refrigeration System Manufacturers....


   
Hospital Supplies
Medical Equipment
Hospital Medical Supplies
Manufacturer Suppliers
Support